UBC Bearing 6000 2Z deep groove ball bearing radial bore Ø 10 mm outer diameter 26 mm speed (max.) 28000 rpm
 
Deep groove ball bearings, single row, DIN625
Deep groove ball bearings are one of the most sold bearing types because of their versatility and value for money. They absorb radial and axial forces and are suitable for high speeds. Due to their design features, deep groove ball bearings are suitable for a wide range of applications. UBC deep groove ball bearings are heat treated so that they can be used up to an operating temperature of 150 °C.
Deep groove ball bearings with cover plates on both sides.
The suffix 2Z behind the type number indicates two cover plates attached on both sides. Cover plates protect the interior of the bearing from the ingress of dirt particles and other foreign bodies. However, when the outer ring is rotating, these bearings reach a maximum of 40% of the speed limit. Deep groove ball bearings from the manufacturer UBC that are covered on both sides are greased for life and are therefore maintenance-free.
Deep groove ball bearings with sealing washers on both sides.
The suffix 2RS behind the type number indicates two sealing washers attached on both sides. These seals, which consist of rubber-coated sheet steel reinforcements and have a sealing lip on the inner ring, have a high protective effect against dirt and moisture. The synthetic rubber material is resistant to a variety of aggressive media. Deep groove ball bearings from the manufacturer UBC, sealed on both sides, are greased for life and are therefore maintenance-free.
 
Technical data:
Type: 6000 2Z
Manufacturer part no.: RIKULA 6000 2Z
Particularities: Z-discs on both sides
Bore diameter: 10mm
Load capacity dyn. Radial: 4550 N
Outside Ø: 26mm
Carrying number stat. Radial: 1960 N
Speed (max.): 28000 rpm
Product Type: Radial deep groove ball bearings
 
Dimensions (Ø x L): 26 mm x 8 mm
Diameter: 26mm
Length: 8mm