SICK S30A-6011BA Safety Laser Scanner S3000 Standard 0m to 8m Male Conn M12 5Pin
S3000 Standard
The S3000 Standard is the economic solution for protecting hazardous points, danger zones and entrances, as well as for protecting automated guided vehicles. The S3000 Standard is designed for simple applications with one protective field. By the proven triple field mode and the function of simultaneous monitoring of up to four protective fields- in combination with the SICK safety controller- mobile and stationary applications are more efficiently implemented. The integrated EFI interface also allows additional sensor functions, e.g. connecting SICK safety controllers. The system plug with built-in configuration storage enables rapid device replacement without using a laptop. CDS (Configuration & Diagnostic Software) can be used to define protective and warning fields in a convenient and standardized way on a PC or laptop.
At a glance
- 4 m, 5.5 m or 7 m protective field range
- 1 field set
- Configuration memory integrated in the system plug
- Interface (EFI) for reliable SICK device communication
- Selectable resolution for hand, leg or body detection
- Simultaneous monitoring of up to 4 protective fields
- Contour as reference for vertical applications
- Integrated external device monitoring (EDM)[Opto-Electronic Protective Devices]
SICK S30A-6011BA Safety Laser Scanner S3000 Standard
- Configuration PC ; CDS (Configuration and Diagnostic Software)
- Connection Type System plug with or without connecting cable
- Dimensions 155 x 185 x 160 mm
- Housing Material Aluminum die cast
- IP Rating IP65
- Measuring Range 8 m
- Operating Voltage 24 V
- Operating Voltage Range 16.8 to 28.8 V
- Output Type 2 PNP semiconductors, short-circuit protected, cross-circuit monitored
- Power Dissipation 0.8 ; 2.3 A
- Resolution 14 mm
- Response Time 60 ms (depending on basic response time and multiple sampling)
- Series S3000 Series
- Shock Resistance 16 g, 16 ms (IEC 60068-2-29)
- Type Safety Laser Scanner
- Weight 3.3 kg